FPV Drone ESC
BLHeli_S firmware which supports Dshot and maximum 500k eRPM.
Twisted silicone signal wire, stable flight.
|
|
|
|
|
Raptor BLS-Mini-15A |
Raptor BLS-Pro-20A |
Raptor BLS-30A |
Raptor BLS-Pro-50A |
|
2-3s |
2-4s |
2-4s |
3-6s |
|
15A |
20A |
30A |
50A |
|
20A |
30A |
40A |
60A |
|
No |
No |
No |
No |
|
5g |
6.2g |
6.2g |
10.2g |
|
15×11.5×4.2mm |
26.5×13×5mm |
27×12×5mm |
33×16×6mm |
|
G-H-30 |
A-H-30 |
A-H-30 |
A-H-30 |
|
90-150 Multi |
170-210 Multi |
170-330 Multi |
170-450 Multi |
|
● EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50 MHz maximum operating frequency.
● Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is 500k eRPM.
● BLHeli-S firmware is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.
● Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
● Supports higher KV motor and more power load, more suitable for violent flight of racing drone .
● The code supports regular 1-2ms pulse width PWM input, as well as Oneshot and Multshot . The input signal is automatically detected by the ESC upon power up.
● Supports Dshot150, Dshot300 and Dshot600.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
● The silicone twisted-pair of the throttle signal cable increase the service life,and effectively reduces the crosstalk caused by signal transmission, and makes flight more stable.
